Product Category: HDMI Splitter
The HDMI video wall is a simple four-screen splicing processor that enables four-screen splicing or single-screen display with one button. It adopts unique embedded hardware design, can accept various image signal source input and is divided, amplified, real-time distortion-free HDMI output, the process is completely hardwareized, no need for computer and startup software, it is very simple. The basic function is to divide and enlarge the externally input HDMI signal into a full-screen image, and then output the splicing display directly to the terminal display device from the four HDMI outputs.
The MT-VIKI’s HDMI video wall can support input screen splicing and picture non-splicing mixed mode. Display on different screens at the same time, customers can combine them into any splicing scheme to display by cascading mode.
The HDMI image splicing processor adopts cutting-edge processing techniques such as motion detection and compensation calculation, interpolation operation, edge smoothing processing and clutter signal suppression. The screen after splitting has no delay, no smearing, smoothness and clear picture quality.
Full hardware architecture, no software settings, no virus infections, good security
Multi-bus parallel processing, powerful processing, fast start-up
With pure hardware design, non-volatile memory dialing settings, once set, permanent use.
Cascading mode and multi-mode combination to form various shaped stitching
One way HDMI1.4 signal input, 4 HDMI signal output
Support audio input and output
Support splicing mode to change at will, four-way splicing can be 2x2 mode, can also set 2x1, 3x1, 4x1, 1x2, 1x3, 1x4 and other modes
Support 3D signal automatical recognized when HDMI1.4 input, and automatically switched.
Support edge shielding technology
Support to modify the stitching mode through the DIP switch
DIP switch and output mode correspondence table: (after the splicing mode is modified, it needs to be powered off and restarted)
Mode 1: (2x2 stitching)
Mode 2: (up and down two screens)
Mode 3: (up and down three-screen)
Mode 4: (up and down 4 screen)
Mode 5: (left and right 2 screen)
Mode 6: (left and right 3 screen)
Mode seven: (left and right 4 screen)
Note: support cascading mode, in all modes
Support 480i, 16.77 million colors
Digital video and I2S digital audio signal output simultaneously
Output refresh resolution
24bit, 16.77 million colors
Supports 4 display units
5% to 95%
MT-VIKI provide wide range products. This USB3.0 capture is one of our product. We also specialized in KVM switch, matrix switch, HDMI splitter, switch, converter, HDMI extender, computer peripheral and cable etc.
Copyright © 2016 Guangzhou MT-VIKI Electronics Co.,LTD. All Rights Reserved