This 4 in 4 out HDMI matrix switcher allows up to 4 HDMI sourde devices to be switches to 4 HDMI monitors, HDTVs, or projectors. It is easy to pair any output with any input at the same time and each HDMI output has independent coaxial S/ PDIF port. The switcher supports video signals at resolutions up to 4K@60Hz 4:4:4, data rates up to 18Gpbs, deep color up to 30/ 36-bit, 3D, and HD audio formats, it offers flexible control options, such as front panel buttons, RS232 serial port, web based GUI, and IR remote, Also, other features include hot plug-and play, EDID and HDCP management. The unit contains in-built equalization and amplification to ensure optimum signal transmission without loss in video/ audio quality. All the powerful features make it ideal for integration into various environments.
Features:
Four HDMI inputs by four HDMI outputs with four S/PDIF audio outputs de-embedded from HDMI
Support HDMI 2.0 and HDCP 2.2, compliant with lower standards
Capable of transmitting 4K*2K@60Hz 4:4:4
Support HDMI HDR
Support manual HDCP management and auto-detecting
LCD screen shows real-time I/O connection status, switching status, HDCP status, and output resolution
Controllable via front panel buttons, RS232, IR and RCP/IP
Built-in web-based GUI for TCP/IP control
Powerful EDID management
Support firmware upgrade through Micro USB port
Easy installation with rack-mounting design
Panel description
Front Panel
1. Power switch: turns the unit On and Off
2. LCD screen: displays real-time operation status
3. Power LED:
On: When the unit is powered on
Off: When the unit is powered off or in standby mode
4. IR sensor: receives IR commands from the supplied IR remote
5. Output buttons: selects outputs or views which input is ties to this output.
6. Enter button: confirm operation. Press and hold this button for 3 seconds to view the current ties between inputs and outputs
7. PTP button: tie the inputs 1 through 4 to the outputs. 1 through 4 correspondingly, that is, input 1→ output 1, input 2 → output 2. input 3 → output 3, and input 4→ output 4
8. Recall( Down) button: recall the switching setting from a scene or move the cussor down to highlight an item.
9. Store( UP) button: store the current switching setting to a scene or move the cursor up to highlight an item.
10. EDID button: enable in put to manully capture and learn EDID from output
11. All button: tie a single input to all outputs.
12. Input buttons: selects inputs
Rear Panel
1. Input interface: connects HDMI source devices to these female HDMI input interface
2. Output interface:
HDMI interface: connects HDMI output devices to these female HDMI output interface
S/PDIF interface: connects audio devices such as amplifiers to these female S/PDIF interface for audio output de-embeded from HDMI
3. Firmware( Micro USB) interface: used to upgrade the matrix switcher with a USB cable.
4. IR in interface: connects to the included IR receiver for using the supplied IR remote to control the matrix switcher
5. RS232 interface: connects to a host computer or a control system with a serial cable. This port is used to send commands to the matrix switcher for device configuration and control
6. LAN interface: connects the matrix switcher to a computer, a network switch, or a control system via this RJ-45 interface. You can use a computer to configure and control the matrix switcher through the web-based GUI.
7. DC 12V: connects to the supplied 12V DC power adapter
8. Ground screw: protective earth
Connection diagram:
Video Input | Video Output | ||
Input | 4 HDMI | Output | 4 HDMI |
Input connector | Female HDMI | Output connector | Female HDMI |
Input Level | T.M.D.S. 2.9V- 3.3V | Output Level | T.M.D.S. 2.9V- 3.3V |
Input impedance | 100Ω (differential) | Output impedance | 100Ω (differential) |
Video General | |||
Gain | 0 db | Bandwidth | 18 Gbit/s |
Video signal | HDMI(or DVI-D) | Resolution range | Up to 4K*2K @60Hz 4:4:4 |
EDID management | In-built EDID data and manual EDID management | ||
HDCP | Supports HDCP2.2, auto and manual HDCP management | ||
Audio General | |||
Output signal | Stereo audio Digital audio | Output connector | 4 Coax(RCA) |
Coax output | Supports PCM, Dolby digital, DTS, DTS-HD | ||
Frequency response | 20Hz ~ 20KHz | ||
Control Parts | |||
Control ports | 1 IR IN, 1 TCP/ IP(Female RJ-45), 1 RS232 (9-pin female D) | ||
Panel control | Front panel buttons | Rs232 control | 3 pin RS232 connector |
IR | Built-in IR sensor and extended IR receiver | TCP/ IP control | Web-based GUI |
General | |||
Power supply | DC12V 2.5A | Power consumption | 12W(Max.) |
Temperature | 0- 50 ℃ | Reference humidity | 10% ~90% |
Dimension (W x H x D) | 437*44*210mm (1U high, full rack) | Weight | 2.0Kg |
Package contents
1x Matrix switcher
2x Mounting rack(6x screws)
1x RS232 cable
1x IR receiver cable
4x plastic cushions(4x black screws)
1x IR remote
1x Power adapter(DC 12V 2.5A)
1x User manual