This HDMI extender uses a CAT 5e/6 cable to extend HD signals up to 50 meters and can reach 1080p. It not only breaks the limitation of HDMI cable transmission length, but also is more convenient and flexible, and saves cost for customers. The following applications are provided by the company's equipment: the place that has the requirement to noise, transmission distance and safety, data center of gravity control, information distribution, conference room presentation, teaching environment and company training venue.

 

Product Features:

 

  • Gain adjustment(EQ) for different lengths:

               First gear: within 30m

               Second gear: 30-40m

               Third gear: 40-50m

  • a whole set of features, no need to set

  • CAT-5e/6 cable can replace the HDMI cable for long distance transmission

  • Comply with IEEE-568B standard

  • Use CAT-5e/6 cable to achieve a transmission distance of 50 meters and a maximum distance of 50 meters

  • Automatically adjust feedback information, balance or zoom in, users don't have to worry about the length of the cable

  • Support (EQ) gain adjustment, suitable for transmission of different distances of network cable

  • Supports the highest frequency resolution 1080p

  • Support 165Hz / 1.65Gbps / frame rate (total frame rate 4.95Gpbs) bandwidth

  • Support 8 bits per frame rate (total frame rate 24 bits) dark

  • Supports uncompressed 2-frame audio, such as LPCM


Diagram:

 图片关键词

Interface introduction:

 图片关键词

EDID learning function

Can easily solve the real problem between non-standard HDMI interface or incompatible display, projector and TV. Easily compatible between HDMI and DVI display devices.

The operation method is as follows:

Connect the HDMI extender to the power supply

Connect the HDMI extender transmitter to the monitor HDMI input with an HDMI cable.

Ensure that the monitor is turned on and select the monitor input to the corresponding HDMI input.

Learn the EDID step: first power on the transmitter, then connect the HDMI cable of the monitor to the HDMI port of the transmitter, and then press and hold the button of the transmitter for more than 3 seconds, the indicator light will flash quickly, and the indicator light such as releasing the button will stop flashing. Then the EDID learning is completed, restarting the transmitter EDID is the brand new EDID.

Steps to restore the default EDID: The transmitter is powered on first, and the HDMI or HDMI is not connected to the source. Press and hold the transmitter button for more than 3 seconds. The indicator light flashes slowly. Release the button and other indicators to stop flashing. The EDID is restored. I will read the EDID of 3DTV after power-on.

Note: To be compatible with DVI monitors, you can use HDMI to DVI cable, follow the steps above.



Product specifications:

Input video signal...................0.5-1.0 v P-P, 0.5-1.0v P-P

HDMI resolution.....1080p/ 1080i/ 720p/ 576p/ 576i/ 480p/ 480i

Transmission distance...........................Cat-5e 40 meters, 1080p

Video amplification bandwidth...................1.65 Gbps/ 165Hz

Vertical frequency range...................50/ 60Hz

Operating temperature.....................0°C to +70°C

Use humidity...........................10% to 85% RH( no condensation)

Infrared support......................38KHz

Power....................................DC 5V


Package List:

1* 50m HDMI Extender

2* DC5V Power Adapter

1* User Manual


Box picture for reference:

图片关键词

Telephone
Product Center