This HDMI extender uses advanced HDBaseT technology, which uses no delay, no compression transmission technology, support the transmission of 1080P@60Hz HDMI signals over Cat5e/6 cable, can up to 70 meters, 4Kx2K@30Hz signal can reach 35 meters, in addition, can transmit the RS232 control signal and infrared signals, are widely used in home theaters, exhibitions and command center scenes.
Features:
Support HDCP.
Support uncompressed HDMI HD signals.
Support to transmit 10.2Gbps HDMI signals , infrared signals and
RS232 serial port signal over Cat5e/6 cable
Support transmission distance: 1080P@60Hz 70m, 4Kx2K@30Hz 35m.
Support 340 MHz, bandwidth 10.2G .
Support 3D.
Support CEC.
Support uncompressed audio formats, such as LPCM.
Compression Audio formats that support , such as: DTS Digital, Dolby Digital (include DTS-HD and Dolby True HD).
Support infrared transmission function, you can use the remote control at the display end of 70 meters away to remotely control the HDMl signal source that at the remote end.
Support RS232 penetration.
Support POC single-end power supply, at the receiving end or end of the transmitter
Product schematic diagram of HDMI extender Transmitter
HDBaseT: connected to the HDBaseT IN port on the receiving side through the Cat5e/6 cable.
IR OUT: connected to the IR sender cable to control the external HDMl signal source.
IR IN: connected to the IR receiver cable, which is used to receive the infrared signal from the remote controller.
L: if the indicator constant light, that mean the sender and receiver establish a connection, if not that mean the sender and receiver are not make a connection.
P: power indicator.
DC12V: access to the power adapter delivered with the product, Only need the receiver or sender to connected.
HDMI IN: Connects to the HDMI signal source by HDMI cable. Such as: computer, DVD etc.
RS232: connect to the computer through the RS232 tool to send serial port commands to control the remote RS232 devices, or connecting to devices with RS232 port via RS232 cable to recieve the serial command.
Product schematic diagram of HDMI extender Receiver
HDBaseT: connects to the HDBaseT output port at the sender via the Cat5e/6 cable.
IR IN: connected to the IR receiver cable, which is used to receive the infrared signal from the remote controller.
L: if the indicator constant light, that mean the sender and receiver establish a connection, if not that mean the sender and receiver are not make a connection.
P: power indicator.
DC12V: access to the power adapter delivered with the product, Only need the receiver or sender to connected.
HDMI OUT: connects to HDMI display devices over HDMI lines, such as televisions.
Monitor, etc.
RS232: connect to the computer through the RS232 tool to send serial port commands to control the remote RS232 devices, or connecting to devices with RS232 port via RS232 cable to recieve the serial command.
Application Diagram:
Connection Diagram:
Product specification
HDCP version......................................................................HDCP1.4
Supported resolution.........................................................1080P/1080i/720P/576P/576i/480P/480i
Transmitter Distance..........................................................Resolution: 1080P up to 70m; 4K@30Hz up to 35m
Supported color depth.......................................................deep color 24bit/36bit/48bit
Supported audio format....................................................LPCM/Dolby-AC3/DTS7.1/DSD
Operation humidity..............................................................5 to 90%RH (No Condensation)
Operation temperature....................................................... -15 t0+55 ℃(5 to 131 ℉)
Power Adapter................................................................. Input AC(50Hz.60Hz)100-240V
Power supply....................................................................DC12V
1* 70m HDMI HDBaseT Extender Transmitter
1* 70m HDMI HDBaseT Extender Receiver
2* DC12V Power Adapter
1* IR In Cable
1* IR Out Cable
1* User manual